Step 01
Signs
• Oven will not heat or start cooking cycles
• Door appears to be closed but oven does not recognize it as locked
• F8 error code displays on the control panel
• Oven beeps repeatedly when attempting to start a cooking function
• Self-cleaning function cannot be initiated
• Unable to access oven interior after self-clean cycle
• Door physically feels loose or difficult to close securely
Step 02
Possible Causes
• Door latch striker or catch is misaligned or worn out
• Door lock solenoid has failed or lost electrical continuity
• Door latch sensor (limit switch) is defective or not making proper contact
• Wiring between door latch assembly and control board is loose or corroded
• Control board has failed to recognize door lock signal due to power surge or electrical fault
• Door frame is bent or warped, preventing proper latch engagement
• Debris or food particles are obstructing the latch mechanism
• Thermal fuse in the door lock circuit has blown
Step 03
Safety Checks You Can Do
• Turn off the circuit breaker supplying power to your GE oven for 60 seconds, then turn it back on to reset the appliance
• Verify that your home's circuit breaker for the oven has not tripped; reset if necessary
• Allow the oven to cool completely for at least 30 minutes before attempting any troubleshooting
• Inspect the oven door visually to ensure it is fully closed and seated properly in the frame
• Check around the door latch area for any visible food debris, crumbs, or obstructions and carefully remove them with a soft cloth
• Ensure the oven door opens and closes smoothly without resistance or grinding sounds
• Review your oven's control panel settings to confirm no safety locks or child lock features are inadvertently enabled
• Attempt to manually close the door firmly with deliberate, even pressure to ensure the latch fully engages
• Try running a simple cooking cycle again after performing these checks to see if the error clears
• If the error persists after these steps, the door lock assembly or control board will likely require professional service